latex中插图图注过长,部分未显示

发布于 2022-05-27 15:56:57

在使用latex插入图片时,需要插入的图片注释较长,按照所示过程编译后,部分后面图注消失不显示,也没有自动换页,请问如何解决?

\begin{figure}[tbH!]
    \centering
    \caption[Sparse-SIM resolves known structures of ~60 nm in size.]{Sparse-SIM resolves known structures of ~60 nm in size.}
    \label{fig:02}
    \includegraphics[width=1.0\linewidth]{02}
    
    
    a,b, Separation of two fluorescent lines with interline spacing down to 60 nm by Sparse-SIM. Raw images were either reconstructed with the Wiener algorithm (2D-SIM) or the Wiener algorithm followed by Fourier interpolation before reconstruction with RL deconvolution for 20 (20 RL ×2) or 50 (50 RL ×2) iterations or the sparse deconvolution pipeline (Sparse ×2) (a). The region enclosed by the yellow box was magnified and shown in b. c, A representative example of dynamic ring-shaped nuclear pores labeled with Nup98–GFP in a live COS-7 cell that were observed with Sparse-SIM for more than 10 min. Images under 2D-SIM and Sparse-SIM ×2 configurations are shown on the top and bottom, respectively. d, The snapshot of the nuclear pore structure enclosed by the cyan box in c was compared with a 100-nm fluorescent bead under different reconstruction methods (2D-SIM, 20 RL ×2, 50 RL ×2 and Sparse ×2). e, Because the sizes of nuclear pores were comparable to the resolution of Sparse-SIM and the size of the pixel, we followed the protocol in Supplementary Note 9.1 to derive the actual diameters of the nuclear pore structures labeled by Nup35–GFP (red), Nup98–GFP (yellow), Nup93–GFP (green) and Nup107–GFP (cyan), respectively. f, Average diameters of rings formed by Nup35 (66 ± 3 nm; n = 30 from three cells), Nup98 (75 ± 6 nm; n = 40 from three cells), Nup93 (79 ± 4 nm; n = 40 from three cells) or Nup107 (97 ± 5 nm; n = 40 from three cells). Left and right montages show the results after Wiener reconstruction or sparse deconvolution. g, The magenta box in c is enlarged and shown at six time points. Centerline, medians; limits, 75\% and 25\%; whiskers, maximum and minimum; error bars, s.e.m. Experiments were repeated five times independently with similar results; scale bars, 500 nm (c) and 100 nm (d and g).%图片注释部分
\end{figure}

显示结果如下图:
捕获.JPG
明显可见,图片成功显示,但单词by后续的内容未显示,也没有自动换页到下一页,请问各位大佬如何解决这一问题?

查看更多

关注者
0
被浏览
2.3k
1 个回答
LaTeXStudio
LaTeXStudio 2022-05-27
这家伙很懒,什么也没写!

这样的情况 只能缩小文字,浮动体无法换页的。

撰写答案

请登录后再发布答案,点击登录

发布
问题

分享
好友

手机
浏览

扫码手机浏览